Compare sanitary ware brands by the exact fixture, installation requirements, destination documents and after-sales arrangements. A brand shortlist helps you find options; the purchase decision needs a complete model and supply specification. This guide brings together ten brand and sourcing references, then sets out the checks needed for a comparable bathroom quotation.
Publisher disclosure: George publishes this guide and is included as a bathroom sourcing option. This is a practical comparison, not an independent ranking. Official references were checked on 21 October 2026. Product ranges and documents vary by market; confirm availability, distribution authorisation and warranty coverage for any third-party brand offered in a quotation.
Use the bathroom fixture buying hub to coordinate the wider room package. Here, sanitary ware focuses on toilets, basins and associated bathroom fixtures; taps, shower systems, furniture and accessories need their own material and installation specifications.
Ten sanitary ware brands and sourcing options to compare
Open the linked official reference, select the relevant country or region and record the exact product code. The categories below are starting points for research, not a promise of stock, performance or a particular service package.
| Option and official reference | Starting point and quotation check |
|---|---|
| George | Coordinated bathroom fixture and material sourcing. Ask for an itemised package covering the proposed models, drawings, dimensions, documents and delivery scope. |
| Roca | Toilets, basins and bathroom collections on its U.S. product site. Confirm the regional catalogue, exact reference and mounting configuration; collection names alone do not specify the complete assembly. |
| TOTO | WASHLET bidet seats and WASHLET+ combinations. Distinguish the seat from the toilet assembly and check compatibility, power, water connection and the exact features included. |
| Kohler | One-piece, two-piece, wall-hung and smart toilet ranges. Compare the specific toilet, seat, flushing system and installation documents rather than assuming every model has the same features. |
| Geberit | Concealed tank and carrier systems for wall-hung toilets. Confirm the compatible bowl, frame or carrier, cistern, actuator plate and wall construction as a coordinated system. |
| Moen | Bathroom faucets, shower products and accessories. Check mounting holes, valve and trim compatibility, finish codes and the model-specific parts information for the destination. |
| Gerber | Official support for toilets, seats, sinks and bathroom faucets. Use the bowl, tank, seat and replacement-part references; the support catalogue includes compatibility guides for coordinated components. |
| Duravit | Toilets, basins, bathing products, faucets and bathroom furniture. Compare exact product codes, mounting method, basin and furniture dimensions, fittings and installation requirements. |
| RAK Ceramics | Bathroom collections and related ceramic products. Select the intended market and product references, then check the complete fixture configuration and local supply arrangements. |
| CERA | Sanitaryware, faucets, showers and related bathroom products. Confirm the offered product code, technical sheet, destination availability, installation needs and applicable warranty route. |
For George, begin with your room schedule and the material packages you need. Ask the proposal to identify each offered product’s manufacturer or brand, specification and supporting documents. Where a preferred reference is unavailable, review any alternative explicitly before approval.
Need a coordinated sanitary ware package? Send George your fixture list, room plan and destination. Identify which models are fixed and which selections need help so the quotation can address the actual project.
Discuss Your Bathroom PackageSix checks before choosing sanitary ware
1. Define the complete assembly
A toilet order may involve a bowl, tank or concealed cistern, carrier, seat, flush plate and fittings. A basin package may need a countertop or vanity, drain, trap, tap and fixings. Ask the supplier to mark every component as included, optional or supplied by others; two prices are comparable only when their scopes match.
2. Match the finished room dimensions
Use current installation drawings and finished wall or floor references. Confirm mounting, waste outlet, water connection, maintenance access and adjacent door or drawer movement. Record unresolved site measurements for review rather than approving dimensions inferred from a photograph.
3. Compare materials, finishes and care
Ask for the material and finish code of each component, a sample where appropriate and the manufacturer’s cleaning instructions. Ceramic, metal, composite and cabinet components need different specifications. A named surface treatment should be supported by information for the selected product; it does not replace routine care or establish a universal hygiene claim.
4. Verify the offered model’s documents
Collect the technical sheet, installation instructions and required product records before ordering. Keep the model, finish and configuration consistent across the quotation, drawings and documents. The responsible local designer or installer should check project suitability and applicable requirements.
5. Check service and replacement parts
Request the written warranty for the purchase channel and destination, the party handling claims, coverage exclusions and any installation conditions. Ask how cartridges, seats, flush mechanisms, electronic controls and other relevant parts can be identified and obtained. A global brand presence alone does not define your local service arrangement.
6. Compare the delivered package
Separate product prices, accessories, samples, inspection, protective packing, freight, destination charges and installation. State currency, quantities, lead-time assumptions and quotation validity. For repeated bathrooms, carry the same approved item codes into room labels and packing lists, and identify spare quantities separately.
WaterSense, LEED and destination requirements
For a U.S. WaterSense claim, use the EPA product search and match the exact proposed model in the relevant category. EPA notes that some products are incorrectly advertised as labelled. Record the listing and manufacturer documentation instead of applying a saving percentage to an entire brand or bathroom package.
USGBC explains that LEED does not certify products, services or companies. Product information may contribute to a project’s assessment; avoid treating a fixture as LEED-certified. Ask the project team which evidence is needed for its selected rating system and scope.
For an Australian project, use the WaterMark and WELS buying checks to organise the relevant model and registration review. Keep the destination’s product acceptance and water-efficiency checks distinct. A document used in one market should not be assumed to cover another.
Prepare a comparable sanitary ware quotation
Use the following brief with every supplier. If an item is provisional, mark it as “to confirm” and identify who will approve it.
- Project: country, city, residential or commercial use and room count.
- Schedule: room and item codes, fixture types, quantities and units.
- Product: requested brand/model or design reference, material, finish and required functions.
- Installation: current drawings, finished dimensions, mounting, water/waste interfaces and power where applicable.
- Documents: technical sheets, installation instructions and destination-specific evidence requested by the project team.
- Supply scope: components, fixings, spares, substitutions, samples and approval requirements.
- Commercial scope: currency, validity, warranty route, packing, delivery location, shipping terms and exclusions.
- Programme: selection, sample and drawing approvals, required delivery milestones and phased orders.
Ready to compare your bathroom order? Share the brief above with George. Ask for an itemised proposal that identifies the actual products, included components, documents, service conditions and delivery scope.
Request a Sanitary Ware QuoteFrequently asked questions
Which sanitary ware brand is best for my project?
Start with the required fixture and destination, then compare exact models, installation drawings, product documents, service arrangements and the full quotation. The ten options here are a research shortlist; the right choice depends on your project rather than a universal brand ranking.
Are all products from a sanitary ware brand certified for my country?
Do not assume so. Identify the exact model and configuration, obtain the applicable documents and have the responsible local team check the destination requirements. A regional product catalogue or a brand name does not establish acceptance for every product or location.
Does LEED certify sanitary ware products?
No. USGBC states that LEED does not certify products, services or companies. Product information can support a project assessment, but a bathroom fixture should not be described as LEED-certified.
How do I verify a WaterSense claim?
Use the U.S. EPA WaterSense Product Search for the relevant product category and match the listed model to the proposed item. Confirm its configuration and documentation; a general water-saving statement is not the same as a model-specific listing.
Should I choose every bathroom fixture from one brand?
A coordinated collection can simplify finish and style selection, but you still need to check dimensions, mounting, valves, drains and other interfaces. If you mix brands, identify compatible components and agree who reviews the combined installation details.
What should I send George for a sanitary ware quotation?
Send the project destination, room schedule, fixture quantities, drawings, model or style references, dimensions, finishes, required documents and delivery milestones. Ask the quotation to identify the actual manufacturer or brand, included components, substitutions, warranty terms and shipping scope.
Bathroom Toilets
Bathroom Cabinets
Shower Glass